ACER LIQUID E2 V370 MT6589 4.1.2 kitkat TESTED FIRMWARE FREE DOWNLOAD
INFO:
CPU: MT6589(6583) SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
PRELOADER BaseAddr:0x0 Size:0x600000
MBR BaseAddr:0x600000 Size:0x80000
EBR1 BaseAddr:0x680000 Size:0x80000
__NODL_PMT BaseAddr:0x700000 Size:0x400000
__NODL_PRO_INFO BaseAddr:0xB00000 Size:0x300000
__NODL_NVRAM BaseAddr:0xE00000 Size:0x500000
__NODL_PROTECT_F BaseAddr:0x1300000 Size:0xA00000
__NODL_PROTECT_S BaseAddr:0x1D00000 Size:0xA00000
__NODL_SECCFG BaseAddr:0x2700000 Size:0x20000
UBOOT BaseAddr:0x2720000 Size:0x60000
BOOTIMG BaseAddr:0x2780000 Size:0x600000
RECOVERY BaseAddr:0x2D80000 Size:0x600000
SEC_RO BaseAddr:0x3380000 Size:0x600000
__NODL_MISC BaseAddr:0x3980000 Size:0x80000
LOGO BaseAddr:0x3A00000 Size:0x300000
EBR2 BaseAddr:0x3D00000 Size:0x80000
__NODL_EXPDB BaseAddr:0x3D80000 Size:0xA00000
ANDROID BaseAddr:0x4780000 Size:0x32000000
CACHE BaseAddr:0x36780000 Size:0x7E00000
USRDATA BaseAddr:0x3E580000 Size:0x40000000
__NODL_FAT BaseAddr:0x7E580000 Size:0x699A0000
__NODL_BMTPOOL BaseAddr:0xFFFF00A8 Size:0x0
>>Done.
Device Brand : acer
Device Model : C11
Device CPU : MT6589
Device IntName : c11_ww_gen1
Device Version : 4.2.1
Device Compile : 06/05/2013 07:16:32 ?
Device Project : Acer_AV061_V370_1.017.00_WW_GEN1
Device ExtInfo : V370
FIRMWARE DOWNLOAD LINK:
FLASHTOOL DOWNLOAD LINK:
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe*Press OK- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
How To Flash Via SP FLASHTOOL?
ENJOY.
0 comments:
Post a Comment