GUIDE TO FLASH IRIS I-S5 MT6582 FLASHTOOL TESTED WITHOUT BOX

FLASH IRIS I-S5 MT6582 TESTED FIRMWARE

INFO

Phone found! [ 45 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6582

BB_CPU_NME : [MediaTek] MT6582_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x87

NAND Flash : NOT INSTALLED

eMMC Flash : 90014A4838473264040502A1B90771A5

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , d2G8

[eMMC] : FLASH_CID : 90014A4838473264040502A1B90771A5

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000001D2000000

[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]

DEV RID    : 0xECD5AB9A59DF5A8DBCDB23C38539447C

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

Brand     : IRIS

ProdName  : htt82_wet_jb5

ProdModel : IRIS ONE

Device    : htt82_wet_jb5

AndroidVer: 4.2.2

MTKxCPU   : MT6582

MTKxPRJ   : ALPS.JB5.MP.V1.5

[Read Ok] : preloader_htt82_wet_jb5.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : EBR2

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / htt82_wet_jb5 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 933 MiB

FIRWARE & FLASH TOOL YOU WILL FIND IT IN THE NEXT LINKS:

DOWLOAD FIRMWARE:     MT6582__IRIS__IRIS_ONE__htt82_wet_jb5__4.2.2__ALPS.JB5.MP.V1.5

DOWNLOAD FLAASH TOOL:  
   MTK FLASHTOOL

How To Flash Via SP FLASHTOOL?

1-Requirements:

1. • A Computer PC Run Windows XP or above
   • Usb data cable (not a generic cable)
   • Mtk usb drivers installed manually, you will find instruction bellow
   • Your Mtk Smartphone Face a soft issue
   • Original stock rom (you can find it above in download section)
   • The latest SP Flashtool version
   
   
   2-How to install VCOM Drivers:
   • Open device manager from my PC or my computer.
   • Click on any item and go to actions > Add legacy hardware
   • Now, press next and select install drivers manually
   • Press next and click on have disk
   • from the browse option, select VCOM drivers From mtk drivers folder
   • Once its done. You will see a screen similar to this:
   
   
   
   
   
   
   
   
   
   • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
   
   
   
   
   
   
   
   3-How to flash rom using SP Flashtool?:
   
   
   • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
   • Launch SP Flashtool 
   
   
   
   *Double clicks onFlash_tool.exe
   
                                          *Press OK
   
   
   
   
   
   
   
   
   
   
   
   
   
   • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
   
   
   
   
   
   
   
   
   
   
   • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
   • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                  
   
   
   
   • Once you are done with everything, click on the download button at the top of the software.
   
   
   
   
   
   
   
   Stop should now be prominent while other options should be grayed out
   
   
   
   
   • Connect your switched off phone with battery inside to PC via Usb cable
   • A progressbar should start running
   
   
   
   
   
   • In the end of an success flash process, a box should show up with green OK symbol inside
   
   
   
   
   
   • Disconnect the phone, remove the battery, slot it back in then power the phone.

ENJOY.