WINSTAR W1000 FLASH FILE SPD PAC SP7715GA 4.4.2 V03 CM2 READED FIRMWARE BY FOYSAL TELECOM

SCX15_SP7715GA_[NAND_b256k]_scx15_sp7715ga_t9_w1000_wvga_4.4.2_T9A_WINSTAR_W1000_V03_2015_01_16_Winstar_W1000.pac

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 NAND loader v2 Infinity(c)
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name  : scx15_sp7715ga_t9_w1000_wvga
Model Brand : Winstar_W1000
Model Device: scx15_sp7715ga_t9_w1000_wvga
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : T9A_WINSTAR_W1000_V03_2015_01_16
Model Ext   : Winstar_W1000

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7715_modem_sc7715_cp2.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 328 MiB
Saved to : C:\Users\Ft\Desktop\SCX15_SP7715GA_[NAND_b256k]_scx15_sp7715ga_t9_w1000_wvga_4.4.2_T9A_WINSTAR_W1000_V03_2015_01_16_Winstar_W1000\
Done!