This firmwares solve issues like
-Calibration/Touch pad not working after flashing
-Deadboot issues
-Unlocking issues
-Monkey Virus issues
ETC
100% Tested @ My Workshop Dorado Soft Touch GSM Clinic
Firmware Details
Brand Name: Gfive
Brand Prod Model: President G6 Plus
Firmware Os Version: Android 4.4.2 kitkat
Firmware Type: Factory Scatter
Firmware Support: Any country
Language Support: Multi Language
Chipset: Mediatek 6582
Firmware download size: Check From Download server
Firmware Download Using Password: No Password Applicable
Flashing/Installer Guideline
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.4th Step: Unzip download flash firmware/Stock Rom.5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)6th Step: Setup/open Mediatek smartphone Flash Tools.7th Step: Open Smartphone (SP) Flash Tool.8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .9th Step: Battery Charge minimum 50%.Its important issue for Flash.10th Step:Connect Usb Cable with Pc.11th Step: Press Flash/Download/Upgrade Button.12th Step: Reconnect Battery.13 Step: Press Volume – or Boot key & inset usb Cable.14th Step: Wait 3-8 Minute For Flash Done
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.4th Step: Unzip download flash firmware/Stock Rom.5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)6th Step: Setup/open Mediatek smartphone Flash Tools.7th Step: Open Smartphone (SP) Flash Tool.8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .9th Step: Battery Charge minimum 50%.Its important issue for Flash.10th Step:Connect Usb Cable with Pc.11th Step: Press Flash/Download/Upgrade Button.12th Step: Reconnect Battery.13 Step: Press Volume – or Boot key & inset usb Cable.14th Step: Wait 3-8 Minute For Flash Done
0 comments:
Post a Comment