Home » » Guide To Flash Doogee Kissme DG580 Black Screen Fix android 4.4.2 Tested Firmware

Guide To Flash Doogee Kissme DG580 Black Screen Fix android 4.4.2 Tested Firmware

Posted by Andro Flash Media on Saturday, October 7, 2017


GUIDE TO FLASH DOOGEE KISSME DG580 KITKAT
FIX BLACK SCREEN ERROR
 FREE FIRMWARE DOWNLOAD



DOOGEE DG580 4.4.2 KITKAT

You need this firmware/stock rom if you have encountered this kind of problem in your phone Listed Below:
1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC

5-Black Screen after a wrong Flash


INFO:
Brand     : DOOGEE
ProdName  : J608_PUBLIC
ProdModel : KISSME-DG580
Device    : J608_PUBLIC
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_sm619b_dg_a27_aejly_82.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / sm619b_dg_a27_aejly_82 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 949 MiB

FIRMWARE DOWNLOAD LINK:
password: www.freemobilefirmware.com

FLASHTOOL DOWNLOAD LINK:
MTK FLASHTOOL

DRIVERS DOWNLOAD LINK:
HERE
or
FROM HERE



  1. FELLOW VIDEO INSTRUCTION:
  2. Same instruction for doogee x5 max
  3. 🔻🔻🔻🔻🔻




How To Flash Via SP FLASHTOOL?


1-Requirements:
    • A Computer PC Run Windows XP or above
    • Usb data cable (not a generic cable)
    • Mtk usb drivers installed manually, you will find instruction bellow
    • Your Mtk Smartphone Face a soft issue
    • Original stock rom (you can find it above in download section)
    • The latest SP Flashtool version

    2-How to install VCOM Drivers:
    • Open device manager from my PC or my computer.
    • Click on any item and go to actions > Add legacy hardware
    • Now, press next and select install drivers manually
    • Press next and click on have disk
    • from the browse option, select VCOM drivers From mtk drivers folder
    • Once its done. You will see a screen similar to this:




    • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:



    3-How to flash rom using SP Flashtool?:

    • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
    • Launch SP Flashtool 

    *Double clicks onFlash_tool.exe
                                           *Press OK






    • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).




    • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
    • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                   

    • Once you are done with everything, click on the download button at the top of the software.



    Stop should now be prominent while other options should be grayed out


    • Connect your switched off phone with battery inside to PC via Usb cable
    • A progressbar should start running


    • In the end of an success flash process, a box should show up with green OK symbol inside


    • Disconnect the phone, remove the battery, slot it back in then power the phone.

ENJOY.


0 comments:

Post a Comment

Popular Posts

Blog Archive

.comment-content a {display: none;}