Below Stock Rom Firmware is the Clone version of Infinix X557 (Hot 4).
Tested by me at Dorado Soft Touch GSM Clinic
Display Errors
Fully Tested
Tested by me at Dorado Soft Touch GSM Clinic
it can be flashed using flashtool
This firmware solve Deadboot ErrorsDisplay Errors
Fully Tested
Lets take a good look at this pictures below before flashing
Original Infnix X557
See where the sim port situated (Sides)
File Info
File Name: Infinix X557
Chip: MT6580
File Size: 702MB
Andriod Version: 5.1
DOWNLOAD
See where the sim port situated (Sides)
File Info
File Name: Infinix X557
Chip: MT6580
File Size: 702MB
Andriod Version: 5.1
DOWNLOAD
Flashing/Installer Guideline
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.4th Step: Unzip download flash firmware/Stock Rom.5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)6th Step: Setup/open Mediatek smartphone Flash Tools.7th Step: Open Smartphone (SP) Flash Tool.8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .9th Step: Battery Charge minimum 50%.Its important issue for Flash.10th Step:Connect Usb Cable with Pc.11th Step: Press Flash/Download/Upgrade Button.12th Step: Reconnect Battery.13 Step: Press Volume – or Boot key & inset usb Cable.14th Step: Wait 3-8 Minute For Flash Done
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.4th Step: Unzip download flash firmware/Stock Rom.5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)6th Step: Setup/open Mediatek smartphone Flash Tools.7th Step: Open Smartphone (SP) Flash Tool.8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .9th Step: Battery Charge minimum 50%.Its important issue for Flash.10th Step:Connect Usb Cable with Pc.11th Step: Press Flash/Download/Upgrade Button.12th Step: Reconnect Battery.13 Step: Press Volume – or Boot key & inset usb Cable.14th Step: Wait 3-8 Minute For Flash Done
0 comments:
Post a Comment