Kimfly M11 Display Error After Flash Fixed 100% Tested

This firmwares solve issues like 

-Calibration/Touch pad not working after flashing

-Deadboot issues

-Unlocking issues

-Monkey Virus issues

ETC

100% Tested @ My Workshop  Dorado Soft Touch GSM Clinic

PLEASE TAKE A GOOD LOOK AT THE TWO PICTURES OF KIMFLY M11 BEFORE DOWNLOADING ANY OF THE FIRMWARE.
NOTE THE ONE THAT SUIT YOUR DEVICE USING THE PICTURES ABOVE (CAMERA SHAPE AND WHERE THE FLASH LIGHT IS SITUATED)

Let me call the first picture Rom 1 while the second picture Rom 2

File Informations

KIMFLY M11 SP7731CEB__KIMFLY __M11__sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M11

Target : SP7731CEB__KIMFLY __M11__sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M11
Step #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required …
Rebuild Ok!

Step #2 : Select logic
Select Logic : SC7731

Step #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[ADD FILE] : logo_720x1280.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : sysinfo.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC …
Sign Ok! FW compiled!
Elapsed: 00:02:41

Saved to : SP7731CEB__KIMFLY __M11__sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M11.pac
Done!

DOWNLOAD ROM 1

Forget The Uploaded Saved Name,Just Download And Write To Your Device,If You Got Display Error After Using The First Rom,Then Fix With The Second Rom But Please Look At The Pictures Above Before Downloading Any Of The Rom

DOWNLOAD ROM 2

HOW TO INSTALL THIS ROM

 These are the instructions to flash .Pac Stock ROM on any android Smartphone using Spreadtrum Upgrade Tool.

Remember: Your Android device should have at least 40-50 percent of battery to perform the flashing process. 

Flash Pac Stock Rom on Android Smartphone 

Step 1: Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: Download Stock Rom (.pac) for your Android Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting,you will be able to see many files.

Step 4: Now, open UpgradeDownload.exe.

Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).

Step 6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as pac).

Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing (hold download button to start the flashing process,the button usually up or down button and plug in your cable to begin flashing).

Step 8: Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.

     Once you see the Green Passed Message,Disconnect it and ON your phone.Go to Settings > About Phone > Check firmware.

Then you are Good to go........Enjoy.